JBL VMA1120 Commercial/Restaurant 120W 70v Amplifier+(8) JBL White 6.5" Speakers
Out of Stock
Get notified when this product is back in stock?
Specifications of VMA1120: Frequency Response: Measured at 2.83 Vrms into rated load impedance at any output , 4/8 Ohms Output: 20 Hz to 20 kHz, ±2 dB , 70 V/100 V Outputs: 80 Hz to 15 kHz ±3 dB. Total Harmonic Distortion (THD): Power Amp Output: <0.5%, 20 Hz to 20 kHz. Signal to Noise Ratio: >76 dB. Input Impedance: Mic: 400 Ohms , Line: 20k Ohms , RCA: 50k Ohms. Phantom Power: 27 VDC. Crosstalk: -70 dB. Nominal Input Voltages: Nominal AC Line Voltages: 100, 120, 220, 220 to 240 VAC, 50/60 Hz. Minimum Load Impedance: Low Impedance Output: 4 Ohms , 70 V Output: 40 Ohms , 100 V Output: 80 Ohms. Operating Temperature: 32°F to 95°F. Humidity: 95% RH. Storage Temperature: -4°F to 185°F. Product Dimensions (W x D x H): 17" x 16.3" x 3.5" inches. Product Weight: 20.2 Lbs. Specifications of CONTROL 16C/T : Frequency Range (-10 dB): 62 Hz - 20 kHz. Power Capacity (at low-Z) : 100 Watts Continuous Program Power , 50 Watts Continuous Pink Noise. Transformer Taps: 30 W, 15 W, 7.5 W @ 70V or 100V (plus 3.8 W @ 70V only). Frequency Response (±3 dB): 96 Hz - 15 kHz. Nominal Sensitivity: 91 dB. Nominal Coverage Angle: 110° conical coverage. Directivity Factor (Q): 7.8. Directivity Index (DI): 8.2 dB. Rated Maximum SPL: 108 dB @ 1 m (3.3 ft) average, 116 dB peak. Nominal Impedance: 8 ohms (in direct/bypass 8Ω setting). Crossover Network : 12 dB/oct (2nd order) low-pass to LF driver, 12 dB/oct (2nd order) high-pass to HF driver. LF Driver: 165 mm (6.5 inch) with polypropylene cone, butyl rubber surround, anodized aluminum voice coil former, high temperature voice coil. HF Driver: 19 mm (3/4 in), highly-damped treated-silk dome, Kapton voice coil, liquid cooling, wide dispersion waveguide. Input Connector: Removable locking 4-pin connector with screw-down terminals. Max wire size 12 AWG (2.5 mm2).
- Each speaker has a tap switch that you can select 3.8w/7.5w/15w/30w. This amplifier is 120 Watts make sure you do not exceed 100 watts in total. Package Includes : JBL VMA1120 Commercial/Restaurant 120 Watt Bluetooth Mixer/Amplifier with 5 Inputs + (4) Pairs of JBL CONTROL 16C/T 6.5" 30 Watt 70v Commercial Ceiling Speakers For Restaurant/Bar
- JBL VMA1120 Commercial/Restaurant 120 Watt Bluetooth Mixer/Amplifier with 5 Inputs. 5-Input Mixer. Supports USB Drives and Bluetooth. 120W, 1-Output Amplifier. Euroblock, RCA, and 1/4" Inputs. Euroblock Outputs. Per-Channel Bass and Treble Controls. Voice-Activated Ducking. Front-Panel Display and Controls. Configurable Output Routing. Includes Rack Mount Kit.
- Specifications: Output Power Per Channel: 120 Watts into 4 Ohms or 8 Ohms. Insertion Loss: 70 V and 100 V Outputs: 1 dB Max.. Input Channels: 5. Output Channels: 1. Tone Control: Bass and Treble non-detented potentiometers on each channel : Bass: ±14 dB @ 50 Hz , Treble: ±14 dB @ 10 kHz. Input Sensitivity: Mic Input: 5.5 mVrms , Line Input: 1.3 Vrms , RCA Input (Stereo In): 130 mVrms.
- (2) JBL CONTROL 16C/T 6.5" 30 Watt 70v Commercial Ceiling Speakers For Restaurant/Bar. Components: 165 mm (6.5 in) high output driver with polypropylene cone and butyl rubber surround , 19 mm (0.75 in) soft-dome liquid-cooled tweeter. Blind-mount backcan for quick and easy install. Dual conduit/cable clamps.
- Combined 70V/100V and low impedance direct operation : 50 Watts at 8Ω nominal setting , 30W multi-tap at 70V/100V. 62 Hz - 20 kHz bandwidth with wide 110° coverage. High 91 dB sensitivity for high maximum SPL. Color: White.